Every reply IOCB contains a return status from the adapter. The status
location is highlighted "S" in the
sense data below.
Detail Data SENSE DATA NOTE: Below is a portion of the AIX 5.3 and AIX
6.1 error templates. Click here to see full error template
AIX Version 5 and below
RRRR RRRR AAAA AAAA BBBB BBBB CCRR RRRR RRRR YYYY LLLL LLLL LLLL LLLL FFFF
FFFF
QQQQ QQQQ QQQQ QQQQ QQQQ QQQQ QQQQ QQQQ GGGG GGGG OOOO OOOO OOOO OOOO EEEE EEEE
EEEE EEEE VVVV VVVV VVVV VVVV VVVV VVVV VVVV VVVV VVVV VVVV VVVV VVVV VVVV VVVV
VVVV VVVV TTTT TTTT TTTT TTTT TTTT TTTT TTTT TTTT TTTT TTTT TTTT TTTT TTTT TTTT
STTT TTTT HHHH HHHH HHHH HHHH HHHH HHHH HHHH HHHH HHHH HHHH HHHH HHHH HHHH
HHHH
AIX Version 6 and above
| Status S |
Name | What it Means | What to do |
| 0 | Success | Successful completion | None |
| 1 | FCP_RSP_FAILURE | Link layer success, but FCP_RSP payload has one or more error indications, or residual transfer length is not 0 |
FCP received payload should be examined for error conditions. Contact SAN AIX support. |
| 2 | REMOTE_STOP | Stopped by remote N_Port (ABTS) | remote device aborted, if this issue persists, contact SAN AIX support, |
| 3 | LOCAL_REJECT | Local reject (error detect by SLI Port) | Examine local reject code |
| 4 | NPORT_RJT | remote N_Port sent a reject | Examine N_Port reject code |
| 5 | FABRIC_RJT | Fabric sent a reject | Examine Fabric reject code |
| 6 | NPORT_BSY | Remote N_Port sent a P_BSY | This is a remote device issue. If the issue persists, contact SAN AIX supportl. |
| 7 | FABRIC_BSY | Fabric sent an F_BSY | fabric (switch) issue. If the issue persists, contact SAN Central. |
| 8 | INTERMED_RSP | Intermediate response IOCB entry | This is informational only. |
| 9 | LS_RJT | Received an LS_RJT response entry | Examine LS_RJT reject reason code |
| B | CMD_RJT | Local Reject; exchange still open | Examine local reject code |